Build Your Own BCD: Backplate, Wing & Harness, Piece by Piece

By Ibel Perez, owner of Super Diver 911

Most BCDs come as one finished jacket. You pick a size, you pay, and that is what you get.

A backplate-and-wing BCD works a different way. You build it from pieces. Each piece does one job. When a piece wears out, you replace just that piece — not the whole BCD.

That sounds like a lot of choices. It is not, if you go in order. There are really only five decisions. Let's walk through them, one at a time, using the NEX Leatherback parts we sell every day.

First, three quick words, in plain English:

  • A backplate is a flat metal plate that sits against your back. Everything else bolts or threads onto it.

  • A wing is the inflatable air bag behind the plate. It is what floats you. Inside the wing's tough outer shell sits a soft inner bag called the bladder — that is the part that actually holds the air.

  • Lift is how much weight the wing can float, measured in pounds. More lift is not better. The right lift is better.

Ready? Here is the build order.

Step 1: Pick your wing lift

This is the biggest choice, so make it first. The wing has to float you, your tank, and your weights at the surface — and hold you comfortably head-up while you wait for the boat.

The simple rule: the thicker your suit and the heavier your tank, the more lift you need.

  • Warm water, thin suit, aluminum tank — Florida reefs, the Caribbean, a 3mm suit or less. Look at the smaller wings: 25 or 27 lbs. They are light, tight to your body, and easy to pack for travel.

  • A mix of diving — warm water most of the year, but sometimes a 5mm suit, a steel tank, or cooler water. The 34 lb wing is the honest middle.

  • Cold water — thick 7mm suits, drysuits, and heavy steel tanks. You carry a lot more lead to sink all that insulation, so look at 38 or 44 lbs of lift.

NEX Leatherback wings come in 25, 27, 34, 38, and 44 lbs of lift, so there is a size for each kind of diving.

One warning: do not buy a huge wing "just in case." A wing that is too big traps air in folds, flops around, and makes it harder to hold your position in the water. Match the wing to the diving you really do.

You also pick the wing’s outer shell material:

  • Cordura — $440. A tough, proven fabric. The right pick for most divers.

  • Knight Shield — $575. A harder, more cut- and scrape-resistant shell. Worth it if your gear rides in trucks, boats, and rental fleets, or you just want the longest-lasting shell.

If you ever need a bladder on its own — a spare, or a sidemount build — they run $270 to $450 depending on the model.

Step 2: Pick your backplate

This one is easy. The Leatherback backplate is one plate: $199.

The plate is the backbone of the whole rig. It spreads the tank's weight across your back, holds the wing and harness in place, and gives you solid mounting points for accessories. Because it is one simple piece of shaped metal, it is also the part that will probably outlive everything else you own. Buy it once.

Step 3: Pick your harness style

The harness is the webbing — the straps — that hold the plate to your body. NEX gives you two styles, and both are good. They just suit different divers.

  • DIR harness — $110. One single, continuous piece of webbing. No buckles to break, nothing extra. Divers who like simple, standard rigs love it. The trade-off: you set it up once, and adjusting it takes a little patience.

  • Original harness — $180. Adjustable, with quick-release convenience. Easier to get on and off, and easier to fine-tune when you change between a thin summer suit and a thick winter one.

Ask yourself one question: do you want the simplest rig possible, or the easiest rig to adjust? That answer picks your harness.

Step 4: Add the single tank adapter

Most recreational divers dive one tank. The Single Tank Adapter — STA for short — costs $69 and bolts to your backplate to hold that single tank straight, tight, and centered.

Can you strap a tank on without one? Some setups allow it. But the STA makes the tank sit rock-solid with no wobble, and it makes swapping tanks between dives fast. For most single-tank divers, it is money well spent.

Shopping for the gear in this guide?

See the exact gear this post talks about in our shop — family-owned, free U.S. shipping, and we match and beat any authorized dealer’s discount.

👉 Shop the gear at superdiver911.com

Step 5: Finish with the small parts

These are small, cheap, and easy to overlook — and they are what make the rig truly yours.

  • SQC Buckle — $19. Your waist strap buckle, made of Delrin (a strong, lightweight plastic that does not corrode in salt water). It comes in 7 colors, so yes, your buckle can match your fins.

  • Fixed D-Rings — $20 to $35, sold as a pair. A D-ring is a metal ring shaped like the letter D. You clip things to it: a light, a gauge console, a reel, a lift bag. Where you place them is where your gear hangs, so a few well-placed rings keep everything in reach and nothing dangling.

  • MFT Trim Glider — $11.99. A small slider that helps you position weights and accessories on your webbing exactly where you want them, so you float level instead of tipping head-up or feet-up. Also in 7 colors.

None of these will make or break your budget. Together, they turn a standard rig into your rig.

You do not have to buy it all at once

Here is the quiet advantage of building piece by piece: your wallet gets to go at its own pace.

Start with the core — plate, harness, and wing. Dive it. Then add the STA, swap a buckle, place your D-rings where your hands actually reach for them. Many divers build their rig over a season, one piece at a time, and learn exactly what each part does because they chose it themselves.

And if your diving changes later — a move to cold water, a drysuit course, a bigger tank — you change the wing, not the whole BCD. The plate, harness, and small parts stay. That is the whole point of a system built from pieces.

What a full build looks like

Add it up: wing, backplate, harness, and STA, plus your small parts. That is the whole system — the same modular idea as the complete NEX Leatherback Ultimate system at $1,230, which is the ready-built version of exactly this rig.

That is also why so many of our gear packages include the Leatherback. Once you dive a rig that fits you piece by piece, a one-size jacket feels like wearing somebody else's shoes.

You can shop all the pieces in our BCD parts section and build your list in order: lift, plate, harness, adapter, small parts.

Want the full model-by-model comparison before you decide? Read our NEX Leatherback BCD Guide, which puts every system and price side by side.

Not sure which pieces fit your diving?

Not ready to buy yet? Join free for gear tips and the monthly special: superdiver911.com/membership

That is the fun part, and you do not have to guess. Reach out to Super Diver 911 at superdiver911.com or call (754) 444-2431. Tell us where you dive, what suit you wear, and what tank you use. We will help you build your Leatherback piece by piece — and we will tell you honestly if a smaller wing or the simpler harness is all you need.

Support the little guy — shop with a family-owned dive shop.

Super Diver 911 is a small, family-owned dive shop. When you buy from us instead of a big-box store, you keep real dive shops alive — the shops that train divers, service gear, and keep this sport personal. Visit our website, browse the gear, and reach out any time: we match and beat any authorized dealer's discount, and shipping is free anywhere in the U.S.

👉 Shop at superdiver911.com

Let’s help the little guy — support the family-owned dive shops. They’re the heart of this sport.

Ibel Perez

🌊 Premium Dive Gear at superdiver911.com

https://www.superdiver911.com
Previous
Previous

How to Rinse and Store Your Regulator So It Lasts

Next
Next

Make Your Regulator Grow With You: Monterey Upgrades Explained