By Ibel Perez, owner of Super Diver 911
Most divers outgrow their first regulator.
Your diving changes. You take a new course. You add a piece of gear. You dive somewhere new. And the first stage you started with cannot keep up — so you sell it and buy a whole new one.
The NEX Monterey Original works a different way.
You start with a strong first stage at a fair price — from $550. Then, when your diving grows, you add a small upgrade kit to the regulator you already own. No new first stage. No starting over. You only pay for the step you are ready for.
In this guide, we explain every Monterey upgrade in plain words: what it does, who needs it, what it costs, and when to add it.
A quick refresher: what the ports are for
The first stage is the metal part of your regulator that clamps or screws onto your tank. It takes the high-pressure air in the tank and drops it down to a pressure your mouthpiece parts can use.
On the outside of the first stage are ports — threaded holes where your hoses plug in. There are two kinds:
Low-pressure (LP) ports feed the parts you breathe from and your BCD inflator — the hose that puts air into your buoyancy vest.
High-pressure (HP) ports feed your pressure gauge or the small sender that talks to a wrist computer, so you can see how much air is left.
The base Monterey comes with 4 LP ports and 2 HP ports. That covers a normal recreational setup with room to spare: your main mouthpiece, your octopus (the spare mouthpiece you carry for a buddy), your BCD hose, and your gauge.
So why upgrade at all? Because the day may come when four LP ports are not enough, or the water you dive in changes. That is where the kits come in.
Kit 1: The 5th Port Kit — $20
This is the smallest upgrade and the cheapest: $20.
The 5th Port Kit adds one more low-pressure port, taking your Monterey from 4 LP ports to 5.
Who needs a fifth port? Two common cases:
You start diving a drysuit. A drysuit is a suit that stays dry inside and needs its own air hose to add small puffs of air as you descend. That hose needs an LP port of its own.
You want cleaner hose routing. Some divers run a long primary hose — a setup where your main mouthpiece hose is longer so you can hand it to a buddy with room to spare. A fifth port can give that hose a straighter, neater path.
If neither of those sounds like you yet, skip it for now. That is the beauty of the Monterey: the port can be added later, in minutes, when you actually need it.
Kit 2: The Turret Kit — $80
The turret is the round top section of the first stage where the low-pressure ports sit. On the base Monterey, that section is fixed — it does not move.
The Turret Kit, $80, swaps in a rotating turret — one that swivels.
Why would you want your ports to swivel? Hoses are stiff. When every port points in a fixed direction, hoses bend at awkward angles and can pull on your mouthpiece or crowd around your head. A rotating turret lets the hoses settle into natural angles as you move. The setup feels cleaner, and routing gets much easier as you add more hoses.
A full turret build also opens the door to a lot more ports — up to 9 LP ports in the turret configuration. Very few recreational divers need nine. But if your diving keeps growing toward advanced setups with several hoses, the Monterey can get there without being replaced.
Who needs it: divers running long-hose setups, divers who keep adding gear, and anyone whose current hoses fight them on every dive.
Kit 3: The Seal-Un-Seal Kit — from $35
This one is about the water you dive in.
Inside every first stage is a small chamber that senses the pressure of the water around you. On an unsealed first stage, that chamber is open to the sea. In warm, clean water — most Florida diving — that is perfectly fine.
But cold water and dirty water are harder on that open chamber. Cold can affect how the parts inside move, and sand or silt can work its way in.
An environmental seal closes that chamber off and fills it in a way that keeps water, sand, and silt out. The Seal-Un-Seal Kit, from $35, lets you seal your Monterey when you need it — and here is the part we like — run it unsealed when you don't. A trip to cold water? Seal it. Back home in warm Florida water? Unseal it. You choose, and you can change your mind.
Who needs it: divers who travel to cold water, dive in silty lakes or quarries, or simply want the inside of their first stage kept as clean as possible.
Shopping for the gear in this guide?
See the exact gear this post talks about in our shop — family-owned, free U.S. shipping, and we match and beat any authorized dealer's discount.
👉 Shop the gear at superdiver911.com
Conversion kits: switch between DIN and Yoke
One more upgrade has nothing to do with ports. It is about how your first stage connects to the tank.
Yoke is the clamp style most common on rental tanks in the U.S. and the Caribbean. It fits over the tank valve and tightens down.
DIN screws directly into the tank valve. It is a very secure connection and is common on newer tanks and in technical diving.
Here is the problem divers run into: they buy one style, then their diving changes. They buy their own tanks with the other valve. They travel somewhere the other style rules. With most regulators, that means a new first stage.
With the Monterey, it means a conversion kit. The store's Conversion Kits section carries kits to switch a first stage between DIN and Yoke. Same regulator. New connection. Problem solved for the cost of a kit instead of the cost of a regulator.
So when do you add each upgrade?
Think of it as a simple road map:
Starting out: dive the base Monterey — 4 LP and 2 HP ports cover a full recreational setup.
Adding a drysuit or a long hose: add the 5th Port Kit ($20).
Diving cold or dirty water: add the Seal-Un-Seal Kit (from $35).
Hoses multiplying or routing feeling messy: add the Turret Kit ($80).
New tanks or new travel plans: convert between DIN and Yoke.
You might add one of these in your first year. You might add none. The point is that the choice stays open, and each step costs kit money — not new-regulator money.
One honest note: Monterey vs N1 Stealth
Divers sometimes ask whether they should skip all this and buy the N1 Stealth, which comes fully set from day one — sealed, with a rotating turret built in.
Here is our honest answer: both regulators perform the same. Breathing is not the difference. The difference is how you like to buy. The N1 gives you everything up front. The Monterey lets you start lower and pay as you grow. Neither choice is wrong — it depends on the diver.
We compared the two side by side here: Monterey vs N1 Stealth: which first stage is right for you?
Ready to grow your Monterey?
Not ready to buy yet? Join free for gear tips and the monthly special: superdiver911.com/membership
If you already dive a Monterey and one of these kits fits your next step — or you are shopping for a first regulator that will not need replacing in two years — reach out to us at Super Diver 911. We will help you pick only the upgrades you actually need, and skip the ones you don't.
Visit superdiver911.com or call (754) 444-2431. Online only, with free U.S. shipping — and honest advice from a diver who dives this gear himself.
Support the little guy — shop with a family-owned dive shop.
Super Diver 911 is a small, family-owned dive shop. When you buy from us instead of a big-box store, you keep real dive shops alive — the shops that train divers, service gear, and keep this sport personal. Visit our website, browse the gear, and reach out any time: we match and beat any authorized dealer's discount, and shipping is free anywhere in the U.S.
Let’s help the little guy — support the family-owned dive shops. They’re the heart of this sport.