Your Hose, Your Length: Custom Scuba Hoses Made in the USA

By Ibel Perez, owner of Super Diver 911

Most divers never think about their hoses.

A regulator comes out of the box with the hoses already on it, and that is what most people dive for years. But hose length matters more than divers think. A hose that is too long loops out, drags, and catches on things. A hose that is too short pulls at your mouth on every turn of your head. And a worn hose is a safety problem waiting for the wrong moment.

At Super Diver 911, we do hoses a different way. Our NEX custom hoses are made in the United States, and no hose sits prebuilt on a shelf. Each one is cut and built by hand, to order, in the exact length you ask for — with the colors and fittings you pick.

Quick words before we start, so everything below is clear:

  • An LP hose (low-pressure hose) carries air from your first stage — the part that mounts on the tank — to your second stage, the part in your mouth. LP hoses also feed your backup second stage (your octopus) and your BCD inflator.

  • An HP hose (high-pressure hose) carries full tank pressure from the first stage to your pressure gauge, or to the small transmitter that sends your air reading to your dive computer.

  • Rubber vs braided: a rubber hose is the smooth classic hose. A braided hose has a woven outer sleeve — it is lighter and bends more easily. More on braided below, because ours is built differently inside.

Made in the USA — and Cut to Any Size You Want

Most hoses on the market come in a few fixed lengths, made overseas, by the thousands. If your setup does not match one of those lengths, you live with it.

Ours are made in the USA and cut to order. The common LP lengths — 28, 30, 32, 34, and 36 inches — cover most divers, and HP hoses run from a short 6-inch transmitter hose up to 42 inches. But if you need a size in between, or a size nobody stocks, that is the whole point: tell us the length, and we cut it.

Need an extra-long run for a special setup? We build custom lengths to order — any length you need, up to 200 feet (2,400 inches). That is something the fixed-length brands simply do not offer. You measure your setup, we build your hose.

And because each hose is built when you order it, the fittings are assembled onto your hose — not pulled from a bin of finished stock. The fittings are chrome-plated, marine-grade brass, made to stand up to salt water dive after dive.

The Only True Red

Here is a small thing that divers who care about their colors will understand.

Plenty of brands sell a "red" hose. Put it in the water and look at it: it is pink. Or orange-red. Or some faded color that is not red at all.

Our red is true red. NEX is the only company with a true red hose — not pink, not an off shade, not a weird color. Red. If you are building a red kit, your hose will actually match it.

Red is one of six rubber hose colors: black, green, orange, white, yellow, and red — the same colors across our LP regulator hose, our BCD inflator hose, and our HP hose. One honest note: braided hose at NEX comes in black. If you want a color, rubber is the way to get it.

Braided Hose, Done Right

Braided hoses are popular for good reasons. They are light. They bend easily. They pack flat for travel, and they look clean on a regulator.

But there is a difference inside that most divers never hear about.

On the well-known braided hoses — the Miflex style most divers know — the inside of the hose is plastic. Bend that hose hard, coil it tight in a gear bag, or fold it for travel, and the plastic core can crack over time.

Our braided hose has rubber inside, not plastic. Bend it, and it bends — no cracking, no breaking. It flexes the way a hose should, it lasts, and it looks beautiful on the regulator. Same light, easy feel on the outside. A tougher heart on the inside.

If your hoses live coiled in a bag between dive trips — and most do — that difference is the one that decides how long your hose lasts.

Swivels and Fittings in Your Colors

A custom hose should finish the way you want it, end to end. So the metal matters too.

A swivel is a fitting that turns, so the hose can move and point where it needs to go instead of twisting against you. Our swivels and fittings come in black, chrome, blue, and purple. Chrome and black are the standard finishes on the product pages; blue and purple are built through our custom request — same hose, your colors from end to end.

Fitting styles cover the real setups divers actually run:

  • Standard fittings for a normal, clean build.

  • Double swivels and 360 swivels that let the hose rotate and sit right.

  • 90-degree adapters that turn a sharp hose bend into a smooth one.

  • Banjo fittings and drysuit fittings for the divers who need them.

You can see the full range on our Custom Hoses & Swivels page. Pick the hose, pick the length, pick the fittings — we build the one hose that fits your rig.

Shopping for the gear in this guide?

See the exact gear this post talks about in our shop — family-owned, free U.S. shipping, and we match and beat any authorized dealer's discount.

👉 Shop the gear at superdiver911.com

Who Is a Custom Hose For?

  • The diver replacing a worn hose. Hoses age out. If yours is stiff, cracked, or bubbling at the fittings, replace it with the exact length your setup needs — not the closest shelf size.

  • The diver building a custom setup. Sidemount, long-hose setups, stage bottles — these live or die on hose routing, and routing lives or dies on length. (Choosing between setups? Read our guide to long hose vs standard octopus setups.)

  • The diver who wants their kit to match. True colors, colored fittings, clean lines. Your gear can work right and look right.

  • Any diver whose size nobody stocks. If the standard lengths are wrong for your body or your rig, a cut-to-order hose ends the fight.

And if your regulator is coming to us for service anyway, a hose check is part of honest maintenance — see our regulator service page for how that works.

What It Costs

Custom does not mean mystery pricing. You pay by the inch for the hose, plus the fitting pair you choose:

  • Rubber LP hose: 43 cents per inch.

  • Braided LP hose: $2.25 per inch.

  • HP hose: 72 cents per inch.

Complete hoses start at $60.46 for the LP regulator and BCD hose, and $49.03 for the HP hose — and shipping is free anywhere in the U.S., except P.O. boxes and military APO/FPO/DPO addresses.

Get Yours

A hose is a small part of your regulator. It is also the part that connects everything — your air, your gauge, your inflator. It should be the right length, the right color, and built to last.

Not ready to buy yet? Join free for gear tips and the monthly special: superdiver911.com/membership

Reach out to Super Diver 911 if you want to get yours. Tell us the hose, the length, and the fittings, and we will build it for you here in the USA. Start on our custom hose pages, browse the full store at superdiver911.com, or call or text Ibel directly at (754) 444-2431.

Support the little guy — shop with a family-owned dive shop.


Super Diver 911 is a small, family-owned dive shop. When you buy from us instead of a big-box store, you keep real dive shops alive — the shops that train divers, service gear, and keep this sport personal. Visit our website, browse the gear, and reach out any time: we match and beat any authorized dealer's discount, and shipping is free anywhere in the U.S.


👉 Shop at superdiver911.com

Let’s help the little guy — support the family-owned dive shops. They’re the heart of this sport.

Ibel Perez

🌊 Premium Dive Gear at superdiver911.com

https://www.superdiver911.com
Previous
Previous

Buoyancy Control, Fixed: How to Stop Rising, Sinking, and Bouncing

Next
Next

How to Rinse and Store Your Regulator So It Lasts